Skip to content


  • 3Point Referencing system
  • Stainless steel worktable hardened with 50º HRC.
  • 8-step programmable flushing control.
  • Real-time sparking detection system gives high response feed back and makes spark erosion steady.
  • Auto power recovery.
Share on whatsapp
Share on facebook
Share on linkedin
Share on email

EX-Series W6 controllers

  • CNC Device: Window based Industrial standard PC.
  • CPU: Pentium 64-bit high speed CPU.
  • Operational Interface: 15″ TFT Monitor, Keyboard, Mouse, Buzzer.
  • Three modes of data transfer namely LAN, RS-232 and USB.
  • Used CRC system to verify received data.
  • Memory Capacity: 2 GB industrial standard CF card.
  • Min command input unit: 0.0001 mm.
  • Programmable dimension ±9999.9999 mm.
  • Switchable Units: Inch/Metric.
Model NoEX60
Maxi. Work piece dimension (mm) W1000 X D700 X H305
Maxi. Work piece weight (kg) 750
Travel of X, Y (mm) 600*400
Travel of U, V (mm) 120 * 120
Travel of Z (mm) 310
WIRE Diameter (mm) 0.15 ~0.3
Numer of axes control (mm) 5 Axis AC Servo Motor
Maxi. Taper Angle ±26o / 100mm
Machine dimension (mm) W2630 x D2565 x H2180
Machine weight (kg) (Machine + Generator + Tank) 3850kg
Maximum cutting speed Note: Test by 0.25mm brass wire / SKD-11 /50mm thickness s180mm ²/ min
Surface finish(1+2 Cuts) 0.6 μ
Dielectric Tank Specifications
Tank Capacity (L) 300L
Paper Filter (PCS) 2PCS
Deionizer Auto
Chiller unit Auto

Please Fill in the details. We will reach you soon.