Skip to content

Universal Wheel Dresse

The wheel dresser the dresses two angles tangent to a radius in one continuous motion with .0001~0.0002 mm accuracy. The wheel dresser with a micrometer feed-0.98″(25mm) travel.

Share on whatsapp
Share on facebook
Share on linkedin
Share on email

Features

SIMPLE-ELIMINATES HEIGHLY SKILLED OPERATORS

Fluidmotion means YOU CAN dress two angles tangent to a radius in one continuous motion-with only one setting. The diamond automatically returns to center position after dressing angles. Thus even a beginner can dress complex froms quickly and accurately. (center height 195mm)

ELEMINATES ELABORATE SETUPS
  • No need to pre-set diamond, or use any other tool except a micrpmeter and a simple hex wrench.
  • No Gage block-Master Gage setting or Block-Parallel Bar-Syurface Plate-Height Gage-Dial indicator.
  • No movement of dovetails necssary to form angles. The angle is dressed by continuing to push handle in both directions after radius is formed.
  • No need to use Gibs & V-W ays other than positioning surfaces.
ACCURATE-RAPID. REPAT FORM-DRESSING

Fluidmotion generates clean, precise wheel profiles entirely free of chatter marks. Without fluidmotion a perfect blend of angles and radius is improbable.

PRECISE SHARP CONTOURS-concave or convex, at a full 180 degrees, are obtained consistenly with (GUARANTEED) 0.001″ accuracy.

CONVEX RANGE-0R-76.2R

CONCAVE RANGE-0.8R-88.9R

ACCURATE…FLUIDMOTION…PRECISE…

HOLD INTERSECTING ANGLES 12 TO 15 seconds. This is accomplished by operating upright and handle.

Setting up two angles requires 10 seconds. Setting two angles and radius requires less than 3 minutes.

THE MOST DURABLE DRESSER AVAILABLE
  • Manufactured from hardened, ground and lapped alloy steels. 
  • No wearing surfaces. Swivels on sealed bearings
  • This form tangent in one setting-two angles-two radius-one flat.
  • MAX. Swing distance of diamond cutter………±14mm
  • Measuring guasi-pin dia…….ø10
  • MAX. Wheel dia……ø200mm
  • Reading accuracy of turret index…….5‘
  • Feed per division of handle scale…..0.01mm

 

Please Fill in the details. We will reach you soon.