- The headstock is a totally enclosed design in oil bath lubrication. A forced lubrication pump delivers oil to all contacting surface for excellent lubrication effect.
- Roll bearing at basement is built round a double column provides max.rigidity and accurancy.
- Spindle main gear are made of SCM material, all through harden and precision grinding.
- Bed is solid construction, it reinforced by ribs. It provides a positive, rocking proof foundation formax.stability.
- column is duplex type, the inner cylinder has a thick wall and reinforced by ribs.
- Coolant pump
- Box table
- Drilltapper set
|Model||RD 1300H||RD 1300HL|
|Distance between spindle center and column center||MAX.1410MM||1410MM|
|Distance between spindle center and column face||MAX.1260MM||1260MM|
|Distance of spindle to base||MAX.1230MM||1400MM|
|Hight of column||2160MM||2330MM|
|MAX. Height from spindel head to base||2582MM||2755MM|
|Base floor space||1840MMX800MM||1840MMX800MM|
|Hight of base||170MM||170MM|
|Spindle head longitudianl travel||920MM||920MM|
|Vertical arm travel||630MM||750MM|
|Morse taper in spindle||M.T.5||M.T.5|
|Working arer of base||1230MMX780MM||M.1230MMX780MM.5|
|Motor for main spindle||3.7KW||3.7KW|
|Motor for arm elevating||1.5KW||1.5KW|
|Motor for clamping device||0.75KW||0.75KW|
|Spindle feeds ranges||0.05~0.306MM/REV.||0.05~0.306MM/REV.|
|6 STEPS||6 STEPS|
|Spindle speeds ranges|
|Net weight (Approx.)||2350KGS||2450KGS|