Skip to content

WIM-CAMDER1.6G

  • Suitable for milling, drilling (Deep Hole Drilling) and thread milling of automobile mould and complex machine components. 
  • Currently, the CAMDER series has developed to the fourth generation.
  • Minimum indexing angle 0.0001° to achieve the world leading level
  • The machining accuracy double increased for lifter hole machining
Share on whatsapp
Share on facebook
Share on linkedin
Share on email

Features

  • 6-Axis Coordinate Advance Milling and Drilling Machine (CAMDER)  
  • Suitable for milling, drilling (Deep Hole Drilling) and thread milling of automobile mould and complex machine components. 
  • Currently, the CAMDER series has developed to the fourth generation.
  • The 6-axis CAMDER of WIM is first developed in Asia. 

Best Suitable for Lifter Hole Machining

  • Full optimization on the accuracy of A, B Axis
  •  Minimum indexing angle 0.0001° to achieve the world leading level
  • The machining accuracy double increased for lifter hole machining
  • Make sure the position accuracy of inlet and outlet within 0.05mm

Accessories

ModelUnitCAMDER1.6G
Drilling capacityGun drill machining hole diameter mm3~40
Ejector drill machining hole diametermm-
Maximum drilling depth in gun drill operation mm1200+500
Maximum drilling depth in ejector drill operationmm-
Tapping capacity -M20×2.5
Milling capacitycc/min180
Traveltable horizontal(X)mm1500
Vertical travel (Y)mm1200
Column horizontal (Z)mm500
Ram tilting angle (A)-15°,25°
Spindle center to table top mm0~1200
Distance from table center to spindle nosemm466~966
Spindle Spindle bore taper-BT40
Max. spindle speedrpm6000
Speed X / Y / Z / W Rapid traverse rate10
Ram maximum tilting speed (A) 215
Table maximum rotation speed (B) 2
PowerX axis servo motorN·m22
Y axis servo motorN·m30
Z axis servo motorN·m30
W axis servo motorN·m12
A axis servo motorN·m22
B axis servo motorN·m30
Total Power RequirementkW60
CNC indexing worktable Max. loading capacityton8
Size (Length x Width)mm1200×1000
Coolant systemCoolant pressure (gun drill)MPa2~11
Coolant pressure (ejector drill)MPa-
Rate of flow (gun drill)L/min6~120
Rate of flow (ejector drill) L/min-
Size & WeightFloor space require (L x W)mm6810×6080
Machine. heightmm3800
Machine weightton18
CNC system-

Please Fill in the details. We will reach you soon.